ideal 450W

The ideal 450 serie of fan-cooled high frequency battery chargers feature wide-range AC input adapting to any single-phase grid worldwide with a peak efficiency of 92%, complying with CEC, possible to set Dip-swithches for output currents and charging profiles for various types of battery packs, widely used for floor machines, small pallet movers, small utility vehicles, small tugs, caddies, etc.

 

Highlighted Features:

  • Optional CAN bus, RS485, I2C, Wi-Fi, Bluetooth communication for machine integration or lithiumBMS.
  • User friendly LED indicators for AC source, batterystatus, charging, error.
  • Field programmable with up to 30 charge profiles.
  • Auto-recharge for low voltage in maintenance mode.
  • OEM customizable & field replaceable AC / DC cabling.
  • Additional portable handle available.
SKU: 57 Category:

 

DC Output 24VDC 36VDC 48VDC
Max. DC output voltage 36V 54V 72V
Max. DC output cuttent 15A 10A 8A
Max. DC output power 450W
Deep discharge recovery

(minimum voltage)

16V 24V 32V
Max. C3 interlock current 7A
Battery type Lead acid (wet / AGM / gel), lithium
Reverse polarity Electronic protection with auto-reset
Short circuit Electronic current limit

AC Input
AC input voltage range 85-270 VAC
Nominal AC input voltage 100-240VAC
Nominal AC input frequency 50 / 60Hz
Maximum AC input current 8A
Nominal AC input current 5.5A @ 100VAC 4.5A @ 120VAC
2.5A @ 230VAC 2.2A @ 240VAC
Power factor >0.99 @ 120VAC >0.98 @ 230VAC

 

Regulatory
Effciency 90% at full load, 120 VAC, 48 VDC | 92% at full load, 240 VAC, 48 VDC

California Energy Commission (CEC) compliant

Safety (LVD) UL1564, CSA 107.2, EN 60335-2-29
Emissions (EMC) FCC Part 15 / ICES 003 Class A, EN55011, EN 61000-6-4
Immunity (EMC) EN 61000-3-2, EN 61000-3-3, EN 61000-6-2

 

Mechanical
Dimensions L214 x W180 x H140 mm
Weight 2.5 kg
AC input connector IEC320 / C14 (requires country-specifc cord)
DC output connector M6 threaded fasteners for ring terminals (field replaceable)
Service port Optional CAN or 485 communication
Mounting holes 6.5mm (1/4”) diameter slots
Cooling Active cooling with fan

Environmental
Enclosure IP21
Operating temperature -10°C to +65°C Derated at >40°C
Storage temperature -40°C to +85°C

Reviews

There are no reviews yet.

Be the first to review “ideal 450W”

Your email address will not be published. Required fields are marked *

Product Enquiry