PRO 720W

The PRO 720 is a sealed series of high frequency battery charger with wide-range AC input adapting to any single-phase grid worldwide with a peak efficiency of 93%, complying with CEC. The charger can be programmed for charging various types of battery packs.It is widely used for floor machines, golf carts, utility vehicles, pallet trucks, aerial work platforms,tow tractors, etc.

Highlighted Features:

SKU: 5 Category:

DC Output

24VDC 36VDC 48VDC
Max. DC output voltage 36V 54V 72V
Max. DC output cuttent 25A 18A 12A
Max. DC output power 720W
Max. C3 interlock current 7A
Battery type Lead acid (wet / AGM / gel), lithium
Reverse polarity Electronic protection with auto-reset
Short circuit Electronic current limit

AC Input
AC input voltage range 85-270 VAC
Nominal AC input voltage 100-240VAC
Nominal AC input frequency 50 / 60Hz
Maximum AC input current 10A
Nominal AC input current 8.5A @ 100VAC 7A @ 120VAC
3.7A @ 230VAC 3.5A @ 240VAC
Power factor >0.99 @ 120VAC >0.98 @ 230VAC

Regulatory
Effciency

90% at full load, 120 VAC, 48 VDC | 92% at full load, 240 VAC, 48 VDC

California Energy Commission (CEC) compliant

Safety (LVD) UL1564, CSA 107.2, EN 60335-2-29
Emissions (EMC) FCC Part 15 / ICES 003 Class A, EN55011, EN 61000-6-4
Immunity (EMC) EN 61000-3-2, EN 61000-3-3, EN 61000-6-2

Mechanical
Dimensions L253 x W126 x H74.5 mm
Weight 4 kg
AC input connector IEC320 / C14 (requires country-specifc cord)
DC output connector Anderson SB 50, customizable
Service port Optional CAN or 485 communication
Mounting holes 8.5mm (1/4”) diameter slots
Cooling

convection cooling

Environmental
Enclosure IP54 (NEMA4)
Operating temperature -10°C to +65°C Derated at >40°C
Storage temperature -40°C to +85°C

Reviews

There are no reviews yet.

Be the first to review “PRO 720W”

Your email address will not be published. Required fields are marked *

Product Enquiry